[<<Previous Entry]
[^^Up^^]
[Next Entry>>]
[Menu]
[About The Guide]
Int 15 Fn 12 - Topview - Send Message - "apply" - Write Panel To Window [Q]
AH = 12h
BX = 0400h
STACK: DWORD handle of panel object
DWORD window's handle (or 0 for current task's window)
DWORD length of panel name
DWORD pointer to panel name
Return: STACK: DWORD handle of window which was used
DWORD handle of keyboard or 0
Notes: status of APPLY may be checked with STATUS message
panel MUST have the following format
first byte must be 1Bh (i.e. must start with a stream)
first opcode in stream must be E5h
single byte arg of opcode is interpreted thus:
bits 7,6 11 means create new window
10 means create new field table for existing window
01 means use existing window and field table
bit 5 if set, panel contains a field table
(creates a new keyboard and puts it in field mode)
bit 4 if set, panel contains input fields
bit 3 if set, panel contains select fields but no input fields
if the panel contains input or select fields, a keyboard handle is
returned; either the window's current open keyboard or a
newly-created keyboard object. The caller should read that keyboard
to obtain input from the panel.
See Also: AH=12h/BH=84h
This page created by ng2html v1.05, the Norton guide to HTML conversion utility.
Written by Dave Pearson